
Piaggio and SBI will finance three-wheelers in UP at 0% interest under CM Yuva Yojana. Here's the real math, who qualifies, and how to apply first.

Truck mileage planning
Estimate Eicher Pro 2049 Plus fuel cost and monthly running expense using your route distance and local fuel price.
Claimed Mileage
11 kmpl
Fuel Type
Diesel
Ex-Showroom Price
Price Coming Soon
Interactive calculator
Change fuel price and monthly distance to estimate real business running cost.
Mileage
11 kmpl
Fuel
Diesel
Default is an approximate national average. Edit it to match your local price.
Monthly Cost
₹51,273
Estimated fuel spend for selected monthly distance.
| Variant | Fuel | Mileage | Monthly Cost |
|---|---|---|---|
| Eicher Pro 2049 PlusTHIS TRUCK | Diesel | 11 kmpl | ₹51,273 |
| Eicher Pro 2049 Plus 2580/Diesel | Diesel | 11 kmpl | ₹51,273 |
| Eicher Pro 2049 Plus 3370/Diesel | Diesel | 11 kmpl | ₹51,273 |
This page keeps the calculation simple: enter the fuel price in your city and the approximate kilometres your truck runs in a month. The tool then estimates cost per kilometre, daily fuel spend, monthly fuel budget and yearly running cost.
The claimed figure is useful for comparison, but daily mileage depends on route discipline and how the truck is maintained.
Payload & load balance
Overloading, uneven load placement and frequent stop-start operation reduce mileage and increase tyre and clutch wear.
Route & traffic
Flat highway routes usually return better mileage than city routes with congestion, slopes and repeated braking.
Maintenance condition
Clean filters, correct tyre pressure, proper wheel alignment and timely engine service help protect fuel efficiency.
Simple operating habits can make a visible difference in Eicher Pro 2049 Plus running cost, especially for high monthly kilometres.
Avoid long idling and harsh acceleration when the truck is loaded.
Check tyre pressure before long routes and keep wheel alignment in range.
Service air filter, fuel filter and engine oil at recommended intervals.
Plan routes to reduce empty return trips, traffic waiting and unnecessary detours.
Track fuel filled, kilometres driven and load weight to identify mileage drops early.
Compare variant mileage with payload needs before choosing the final configuration.
News
Eicher Pro 2049 Plus has a claimed mileage of 11 kmpl. Real-world mileage typically runs 10-15% lower depending on load, route, and driving conditions.
The average Eicher Pro 2049 Plus mileage typically ranges from 9-11 kmpl, depending on driving conditions, load, and road type. This efficient performance makes the Pro 2049 Plus an economical choice for fleet operators.
Heavy loads and aggressive driving significantly impact the Eicher Pro 2049 Plus's fuel efficiency, potentially reducing mileage. Maintaining a steady speed and avoiding sudden acceleration or braking helps optimize fuel consumption.
The Eicher Pro 2049 Plus comes with a 60-litre fuel tank, providing a practical operating range of approximately 540-660 km on a full tank. This ensures fewer refueling stops, enhancing operational efficiency.
Yes, the BS6 compliant E483 engine in the Eicher Pro 2049 Plus is designed with advanced CRS technology to offer improved combustion and better mileage. This technology helps achieve optimal fuel burn, contributing to its overall fuel efficiency.
With a full payload of approximately 2.5-2.7 tonnes, the Eicher Pro 2049 Plus mileage might slightly decrease but still offers competitive figures for its segment. Proper gear selection and consistent driving can help maintain good mileage even with heavy loads.
To improve the Eicher Pro 2049 Plus's fuel efficiency, maintain correct tire pressure, service the truck regularly, and ensure drivers practice economical driving techniques. Avoiding engine idling also significantly boosts overall fuel efficiency.
The Eicher Pro 2049 Plus mileage is generally higher on highways due to consistent speeds and fewer stops, compared to stop-and-go city traffic. Its engine is optimized for a good balance across various driving conditions.
Load weight, terrain (hilly vs flat), traffic conditions, driving style, tyre pressure, and how regularly the engine is serviced all affect real-world mileage. Claimed mileage figures are measured under controlled conditions, so actual mileage is usually 10-15% lower depending on how the truck is used.
Running cost per km is calculated by dividing the fuel price by the truck's mileage (km per litre, kg, or unit depending on fuel type). Monthly and yearly costs are then estimated by multiplying this per-km cost by your typical distance driven.
Yes — aggressive acceleration and hard braking can lower mileage by 10% or more on a loaded commercial truck. Maintaining a steady speed, avoiding unnecessary idling, and keeping tyres correctly inflated are the easiest ways to protect fuel efficiency on long hauls.